Lumitester C-110 61910

  • ATP-based microbial assay
Lumitester C-110:ATP tester

Lumitester C-110 is a small, lightweight and precision instrument for ATP measurement

Feature
Small & Lightweight
Portable body, weighs about 700g. You can carry it easily and make measurement by rechargeable batteries.
High Sensitivity & Wide Dynamic Range
With the special reagents "CheckLite" series, you can measure 1.0 x 10-17 ～ 3.0 ×10-11 mol ATP (1.0 x 10-13 ～ 3.0 ×10-7 M ATP).
Simple & Speedy Operation
Insert a test tube containing mixture of sample and reagent, and just push the start button. The result will be displayed after only 10 seconds*1, and anyone can get measurement results on the spot with ease. ATP concentration and cell count can also be obtained after calibration.
*1 In case of standard mode
Advanced measurement
An advanced mode is pre-installed. This mode enables measurement time and delay time settings, and consecutive measurement, which are suitable for highly professional biochemical research use.
Convenient data processing performance
Measurement data are recorded in the C-110, and can be transferred the data to PC for print out and for data processing.

Detection method Photon counting mode using photomultiplier tube Display LCD (liquid crystal display) panel
Detection range 1.0×10-17～1.5×10-12molATP*2
1.0×10-16～3.0×10-11molATP*3		 Printer Data can be printed out to an optional external printer
Dark noise Below 10 RLU (25℃)*4 Interface RS-232C
Measurement time 10 sec. in STANDARD mode
1-1000sec. in ADVANCED mode		 Software Utility software for data collection and standard curve settings
Sample tube size φ12×55　mm Power Rechargeable battery(NiMH) or AC adapter
Sample volume 0.1 mL Size 185 W×110 D×75 H mm
(excluding projecting parts)
Data output RLU (Relative Light Unit), M (ATP concentration), pg (Amount of ATP), CELL (Cell count) Weight Approx. 700 g
Temperature /
Humidity		 Storage -10 to +50℃, Operating +5 to +40℃/
No condensation
Data storage 1000 pieces of data Accessories Tube stand, AC adaptor, RS-232C cable, Instruction manual, Utility software
  • *2 With CheckLite HS Set reagent (without ATP elimination)
  • *3 With CheckLite 250 Plus
  • *4 In case of standard mode

References

  1. A ratio of spore to viable organisms: A case study of the JPL – SAF cleanroom. Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA. 2017.
  2. Development of a filtration-based bioluminescence assay for detection of microorganisms in tea beverages. J. Food Prot. 2016, 79, 488-492.
  3. Rapid detection of bacteria in green tea using a novel pretreatment method in a bioluminescence assay. J. Food Prot. 2014, 77, 941-947.
  4. Evaluation of an improved bioluminescence assay for the detection of bacteria in soy milk. Biocontrol Sci. 2013, 18, 1-7.
  5. Sensitive detection of bacteria and spores using a portable bioluminescence ATP measurement assay system distinguishing from white powder materials. J. Health Sci. 2004, 50, 126-132.
  6. ATP as a biomarker of viable microorganisms in clean-room facilities. J. Microbiol. Methods 2003, 52, 367-377.

TOP